Product Details
Spring diamond wire for concrete is very competitive in the market. Its fixed by spring, with Sintered Diamond Wire Saw Bead or Brazed Diamond Wire Saw Beads, they are very popular in some countries. We can make different spring diamond wire for concrete as your request. Welcome to inquiry and test buy .
Advantages
1. Easy Manipulation and Low Cost.
2. Flexibility, no limited for the size of work place.
3. High temperature resistance, corrosion resistance, tensile properties.
4. Strict control the quality of raw materials.
5. Low power consume and less raw material waste.
6. Very sharp&Long life
7. Enviromental protection
Product Parameters
ITEN NO. |
Specification |
Beads |
Application |
Connection |
Line Speed |
Cutting Speed |
Wire life |
SSD01C |
10.5 |
40/Meter |
Normally reinforced |
Rubber+Spring |
20-30m/s |
2-5m2/h |
3-8m2/m |
SSD02C |
11.0 |
Strengthening reinforced |
20-2m/s |
1-2m2/h |
1-3m2/m |
||
SSD02C-1 |
11.5 |
Steels or metal structure |
20-25m/s |
0.5-1.5m2/h |
0.5-1.5m2/m |
*Other specifications can be customized according to customer requirements.
Cutting Objects
reinforced concrete structures for supporting beams, buildings, bridges, tunnels, docks and other buildings
Recommended Equipment
22kg-30kw hydraulic wire saw machine, suitable for electric, high frequency, low hydraulic power equipment
Our Products Picture
Instructions about spring diamond wire saw for concrete
1. The cutting direction of the spring diamond bead wire saw has a clear arrow mark on each clip of the spring diamond bead wire saw.
2. The cutting direction of the spring diamond bead wire saw can also be identified by the beading of the diamond bead wire saw itself. The beaded base is long and the short is the front end, so the short front end is the cutting direction of the spring diamond bead wire saw.
Cutting direction Note: In use, it is necessary to correctly distinguish the direction of use of the diamond bead wire saw. Advance in the direction of the arrow, can not cut in the opposite direction, to avoid taper at the front and rear ends of the bead, to ensure the normal use of the diamond bead wire saw.
Which material are you cutting?
http://www.sunstardiamondwire.com/