Original
By certification 
3 Beam Active Infrared Detector
Products Introduction
The 3 beam active infrared detector has industry-leading 4-segment frequency conversion function, the frequency error is accurate to within 1%, completely solves the industry problem of mutual interference when infrared beams are installed under complex conditions. It has many advantages which is a reliable and long-established method of intruder detection system. Once set up they are extremely stable, with a high detection rate and low false alarm rate.detection range can reach 100m-250m.
Features :
Triple infrared (invisible infrared beam) beams.
Digital 4 frequency conversion.
Active infrared detector.
Triple beams simultaneously blocked inspection.
Infrared LED lighting.
Digital wave filtering lighting.
Window sighting telescope.
PC engineering plastic material.
Dew and frost proof solution: heating housing.
Other additional functions: 4 channels frequency conversion technology,LED alignment signal indicator,Sight aiming telescope accessory
Multilevel alignment LED indicator.
Including main unit mounting bracket set
Parameter
Model |
ABE-100 | ABE-150 | ABE-250 |
|
Detection distance |
Outdoor |
100m |
150m |
250m |
| Indoor | 300m | 450m | 750m |
|
Detection method |
Simultaneous interruption of 3 infrared beams |
|||
Interruption time |
50ms,100ms,300ms,700ms(adjustable) |
|||
Frequencies |
4 different frequencies(selectable) |
|||
Power and voltage |
DC9～30V/AC9～20V |
|||
Current consumption |
110mA max |
|||
Alarm cycle |
≥1.5s |
|||
Alarm output |
1C relay output(AC/DC30V,1.0A max) |
|||
Tamper |
NC. works when cover is removed |
|||
IP rating |
IP65 |
|||
Operation temperature |
-25℃~55℃ |
|||
Humidity |
95% max |
|||
Correction angle |
Horizontal Vertical 180°(±90°),Vertical 20°(±10°) |
|||
Install Iocation |
Indoor/Outdoor,Wall/Pole |
|||
Weight |
1670g |
|||
Dimension |
L291mm*W91mm*H92mm |
|||
Attachment | ||||
U bracket |
4pcs ,70.4*37.5*21.5mm, ð=1.5mm,stainless steel |
|||
Pole mounting screw |
8pcs, PM4*30mm |
|||
Wall mounting screw |
8pcs, PM4*25mm |
|||
Expansion pipe |
8pcs, ɸ7*27mm,green |
|||
Installation paper |
2pcs, W85*H220mm |
|||
Heater(additional purchase when temperature lower than -20℃) | ||||
Voltage |
DC9～30V/AC9～20V |
|||
Current |
200mA max |
|||
Temperature |
+60℃ |
|||
Working condition |
Auto heating when it's ≤5℃and stop heating when ≥7℃ |
|||
Product Feature And Application
Production Details
The product use PC Engineering Plastic as main material ,waterproof grade is IP65 and can work in wind,frost,snow,fog environment.If you need customization, there are three colors to choose from, such as blue, orange, and the default black.We have a large production team to serve you.
FAQ
1.Fault: The transmitter light is not on.
Analysis: The power supply voltage is not suitable (disconnection or Short circuit)
Solution: Check the power wiring.
2. Fault:After the light is interrupted, the receiver alarm indicator is on, but no alarm signal is output
Analysis: 1. Wiring is plugged out or short-circuited
2. Poor contact
Solution: Check the power wiring or contacts
3. Fault:Receiver alarm indicator is always on.
Analysis: 1. Poor wiring
2. The power supply voltage is lower than the working voltage
3. There are obstacles between transmitter and receiver
Solution:
1. Check the wiring
2. Check the power supply
3. Remove obstacles or change the installation location
http://www.aleansecurity.com/
