Variable frequency start and LCD display 110/220V or 120/240V split phase inverters manufacture Parameters ModelSDP-5KWIsolation modeLow Frequency TransformerDC InputRated voltage (Vdc)48V96V120VRated current（A）104.16A52A42AAC OutputRated output power5KWOutput waveformPure Sine WaveRated Voltage220V±30/220V or 120/240V380VAC±3%PhasesSingle phaseSplit phase 3 wires ground3 phase 4 wireRated current (A)23A23A(phase current)7.6A (phase current)Frequency50Hz or 60HzRated output voltage range (V)110/120/220/230/240/380/400/415/440VAC optionalPhasesSingle / Two/ Three phase optionalPower Factor (PF)>0.95Overload Ability150%,Website:://.cnsandi.com, 5 secondsEfficiency>94%Waveform distortion rate (THD)<3%(Linear load)Dynamic Response(0 to 100% load)5%, ≤50msDisplayLCDRunning modeWorking continuouslyElectrical insulation properties2000Vac, 1 MinuteAC Bypass FunctionOptionalSolar Charge Controller built inOptionalAC to DC battery Charger built inOptionalRS485 remote monitoringOptionalWide voltage input 100-850VDC(optional)Off grid inverter can work without batteryProtection FunctionProtectionInput reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.Cooling methodFan-cooledShort-circuit protectionNo automatic recovery, need to restart the machineWorking environmentNoise ( 1 meter)≤50dBDegree of protectionIP20(indoor)Working Altitude (m)≤2000Working temperature-25~ 55℃relative humidity0~90%,non-condensingMechanical dimensionDepth* Width * Height450x500x760mmWeight (Kg)75KgCertificationEuropean CE(EMC